Avoid Water Heater Failures This Winter in Chicago

*Estimated Read Time: 3 minutes* Winter in Chicago can be harsh, and a failing water heater can disrupt your daily routine and risk unwanted damage. Homeowners have experienced firsthand the benefits of timely maintenance. As one satisfied customer, Kim R., noted, “Dan came out and fixed my hot water heater quickly and the price was great. I will recommend Summers to all my friends and family” . This article offers practical guidance on preventing water heater failures during the coldest months, ensuring comfort and safety for your home. ## The Importance of Regular Water Heater Maintenance With Chicago’s frigid winters, your water heater endures extra strain. Routine maintenance not only prevents unexpected failures but also helps improve energy efficiency and extend the lifespan of your appliance. Consider the following points: - **Prevent Costly Repairs:** Regular inspections reveal sediment builds, rust, or minor leaks before they escalate into expensive repairs or complete system failures. - **Energy Efficiency:** A well-maintained water heater uses less energy. Cleaning sediment from the tank can increase efficiency and reduce utility bills. - **Safety First:** Timely checks for pilot light issues, faulty wiring, or pressure problems help protect your family from potential hazards such as gas leaks or carbon monoxide exposure. As detailed by Summers Plumbing Heating & Cooling in their maintenance guides, professional inspections involve a multi-point check covering everything from leaks to temperature settings . ## Essential Winter Maintenance Tips Follow these actionable steps to prevent water heater failures during Chicago’s winter: 1. **Inspect and Flush the Tank:** - Schedule an annual flush to remove sediment buildup, which can cause overheating and reduce efficiency. - Look for signs of rust or discoloration in the water, which could indicate corrosion. 2. **Examine for Leaks and Faulty Connections:** - Check for visible signs of leaks around plumbing joints. - Ensure all connections are secure and that the insulation around the unit is intact. 3. **Verify the Pilot Light and Temperature Settings:** - Confirm that the pilot light is working properly. - Adjust the thermostat to the manufacturer’s recommended temperature to prevent overheating. 4. **Professional Inspection:** - Hire a qualified technician to perform a thorough evaluation. Their multi-point service check should include inspecting wires, pressure valves, and ventilation, ensuring your water heater is operating safely for the winter season. ## Summers Plumbing Heating & Cooling: Trusted Expertise With more than 40 years of experience servicing homeowners, Summers Plumbing Heating & Cooling specializes in ensuring that essential systems, including water heaters, run smoothly through the winter. Their technicians are highly trained, equipped with the latest tools, and committed to providing prompt, friendly service. As Angela M. shared, “My father's hot water heater went out. A technician came out on a Friday afternoon, explained everything clearly, and had everything in order for a new water heater installation within 48 hours. I recommend this company for the way they are so thorough with the whole process” . ### More Customer Experiences Another satisfied customer, Jonathan J., highlighted the exceptional responsiveness of the team: “Nick was awesome! We had a pipe leak in our wall, and he came earlier than expected, fixed our problem within 45 minutes, and left minimal damage. He was friendly and knowledgeable—Summers is the best!” . These testimonials speak volumes about the reliable, customer-first service Summers Plumbing Heating & Cooling provides—helping you avoid the stress of sudden water heater failures during winter. ## Take Action Now Don’t wait for a breakdown. Schedule a professional water heater inspection before the winter chill sets in. By following our maintenance tips and entrusting your water heater to skilled professionals, you can ensure continuous hot water, improved energy savings, and peace of mind throughout Chicago's cold season. For personalized service and expert advice, call Summers Plumbing Heating & Cooling at (219) 500-8867 or visit [our website](https://www.summersphc.com/crown-point/). Protect your home this winter and experience the difference of working with true industry professionals. Keeping your water heater in top condition today means a warmer, trouble-free winter tomorrow.

Cedar Lake, IN Water Heater Not Heating? 5 Fixes

*Estimated Read Time: 9 minutes* No hot water is more than a hassle. If your water heater is not heating, you need fast answers you can trust. This guide covers the most common causes, quick checks you can do safely, and when to call a pro. If you are in Crown Point or nearby, our licensed plumbers offer same‑day repairs and a $59 water heater safety inspection to get your hot water back quickly. ## First, a 60‑Second Safety Check Before you troubleshoot, make sure the area is safe. - Check for gas odor. If you smell gas, leave the home and call your gas utility and a licensed plumber. - Turn off power at the breaker for electric units, or set the gas control to Off on gas units. - Look for active leaks, bulging tank, or scorch marks. If you see any, do not relight or power on. - Confirm the water heater has clear space around it and proper ventilation. Summers technicians follow local code and manufacturer procedures on every visit. Our inspection can catch hazards such as faulty wires, improper ventilation, or pressure issues before they become emergencies. ## Reason 1: Power or Fuel Supply Problem If a water heater loses power or fuel, it cannot heat. For electric heaters: 1. Check the dedicated breaker in the panel. Reset if tripped. 2. Inspect the service switch near the unit if present. 3. Press the high‑limit reset button on the upper thermostat behind the access panel. If it trips again, you likely have a failing element or thermostat. For gas heaters: 1. Verify the gas valve is open and the control is set to On. 2. Look through the sight glass. If the pilot is out, follow the manufacturer lighting instructions. Older units use a standing pilot. Newer units spark an igniter. 3. If the pilot will not stay lit, a bad thermocouple, flame sensor, or draft issue may be the cause. When to call a pro: frequent breaker trips, repeated pilot outages, gas smell, or any signs of scorching indicate a deeper fault. Our 24/7 team restores power or relights safely and checks wiring, gas pressure, and venting. ## Reason 2: Failed Heating Elements or Burner Not Firing Electric models use one or two elements. If one fails, you may have lukewarm water or long recovery times. If both fail, you get no hot water. - Symptoms: water goes cold quickly, or never heats; breaker is fine; no error lights. - Fix: test continuity on elements and thermostats. Replace failed parts with manufacturer‑rated components and new gaskets. Always power down and verify no voltage. Gas models rely on a clean burner and strong flame. - Symptoms: pilot lit but burner will not fire, or flame is weak and yellow. - Fix: clean the burner, check the flame sensor/thermocouple, and verify manifold gas pressure meets spec. Improper combustion can create soot and carbon monoxide. A licensed technician should handle combustion checks. Pro tip: Summers stocks common element kits, igniters, and sensors on our trucks for same‑day repairs. Many Northwest Indiana homeowners regain hot water in one visit. ## Reason 3: Thermostat or Temperature Setting Issues If your thermostat is mis‑set or defective, the heater may not heat properly. - Electric: each element has a thermostat. If the upper thermostat fails, the lower never gets power. If the lower fails, you get brief hot water that turns cold. - Gas: a faulty control valve or temperature dial can prevent the burner from engaging or reaching setpoint. What you can do: 1. Confirm the temperature setting is 120 to 125°F for most homes. 2. For electric units, power down and gently tighten loose thermostat wiring. Do not touch live wiring. 3. If water is scalding or ice‑cold regardless of setting, schedule service. Components that control temperature require precise testing and safe replacement. Summers provides free second opinions on major repairs and can verify if a thermostat or gas valve is truly at fault before you invest. ## Reason 4: Sediment Buildup Reducing Heat Transfer Hard water minerals settle at the bottom of a tank. Over time, sediment insulates the water from the heat source. - Symptoms: rumbling or popping sounds, slower heat times, fluctuating temperatures, and higher energy bills. - Fix: drain and flush the tank. Our technicians perform a controlled flush, inspect the anode rod, and check the temperature and pressure relief valve. Why this matters locally: lake‑effect winters in Northwest Indiana push water heaters hard, and seasonal sediment can build quickly. Flushing at least once a year helps restore performance and extends tank life. Summers offers a Water Heater Flush + Plumbing Inspection for $59. During the visit, we follow a multi‑point checklist for cracks or leaks, rust, faulty wires, sediment buildup, water quality, tank pressure, pilot light issues, loose connections, pressure valve adjustments, proper ventilation, and temperature settings. ## Reason 5: Component Failure That Stops Heating Several parts can fail and stop heat production even if power is fine. - Thermocouple or flame sensor: if it cannot verify flame, the gas shuts off for safety. - Hot surface igniter or spark igniter: worn igniters will not light the burner. - Gas control valve: internal failure blocks fuel to the burner. - Dip tube: a broken tube lets cold water mix at the top, delivering lukewarm water. - Anode rod: while not a heat source, a depleted anode accelerates corrosion that can damage elements and reduce heating efficiency. How we fix it: 1. Diagnose with meter readings, manometer pressure checks, and manufacturer error codes when available. 2. Replace only verified failed components using brand‑approved parts from leading manufacturers such as Rinnai and Bradford White. 3. Test for safe operation, venting, and CO before we leave. ## Should You Repair or Replace? A smart decision balances age, repair cost, efficiency, and risk. Consider replacement when: 1. The tank is 8 to 12 years old and needs a major part like a gas valve or multiple elements. 2. There is rust or leaks around the tank body. Tanks cannot be safely repaired once the steel is compromised. 3. Hot water demand has outgrown your tank size. Families often benefit from a larger tank or a tankless system. 4. You want lower utility bills. Tankless models provide on‑demand hot water with high efficiency and save space. Summers installs both traditional and tankless systems. In many cases, we can have systems up and running the same day, with flexible financing and upfront pricing. Our team can show you true lifetime costs before you decide. ## Prevent It From Happening Again Simple habits keep hot water reliable and costs predictable. - Annual flush: remove sediment, test the pressure relief valve, and verify thermostat accuracy. - Anode check every 2 to 3 years: extend tank life by replacing a depleted anode rod. - Expansion control: homes with closed plumbing systems benefit from an expansion tank to manage pressure swings. - Temperature setting: set 120 to 125°F for safety and efficiency. Higher settings risk scalding and extra scale. - Combustion air and venting: for gas units, ensure clear vents and proper makeup air. We inspect draft and CO on service calls. Our maintenance visits follow a consistent multi‑point procedure and include documentation for your records. Ask about membership to lock in savings and reminders. ## Why Summers for Water Heater Help in Northwest Indiana You want a partner who fixes the immediate problem and protects your home. - Proven local experience since 1969 serving Crown Point, Hammond, Merrillville, Schererville, and more. - 24/7 emergency response because problems do not wait for business hours. - Upfront pricing. You agree to the price before the work starts. - Licensed, drug tested, and background‑checked technicians. Trucks stocked for fast service. - BBB accredited and 100 percent satisfaction guarantee. - Brand‑trained on Rinnai and Bradford White for reliable installs and repairs. Outcome you can expect: clear diagnosis, real options, no pressure, and a safe, compliant fix the same day in most cases. ## What To Do Right Now 1. If you have no hot water, check your breaker or gas control and thermostat setting at 120 to 125°F. 2. If you smell gas, shut off the supply and call immediately. 3. If you see leaks or rust at the tank seam, turn off water to the heater and call for same‑day replacement. 4. If the unit is 10 years old or more, ask us for a repair vs replace estimate. We provide free second opinions so you can decide with confidence. Serving Crown Point, Gary, Highland, Munster, Saint John, Dyer, East Chicago, and nearby neighborhoods, we are ready when you are. ## Special Offers for Fast Hot Water Relief - Water Heater Flush + Plumbing Inspection for $59. This month only. Expires 2025-11-05. - $59 Water Heater Safety Inspection. Must present at time of service. Schedule by 2025-11-30. - $500 off tankless water heater installation. Must present at time of service. Schedule by 2025-11-30. Coupons may not be combined with other offers. - $200 off your water heater purchase. This month only. Expires 2025-11-05. Call (219) 500-8867 or schedule at https://www.summersphc.com/crown-point/ to claim your savings. ## What Homeowners Are Saying > "Called Summers at 12.45 pm with water all over basement floor. Brian arrived at about 1.45pm. Installed new water heater and was finished by 4pm. Excellent service. Thank you." > –Brian B., Water Heater Replacement > "Conner and his partner AJ were very polite and courteous... install a new water heater the same day I called, no problem." > –Conner G., Water Heater Installation > "Bryan was a skilled professional... explained about the types of heaters... picked up that model and installed it. I was happy that it was able to get fixed in the same day." > –Bryan H., Water Heater Service > "Sold me on the investment of a tankless water heater. Great choice! Installed quickly. Cleanly. Professionally... 100% would recommend!" > –Nick N., Tankless Installation ## Frequently Asked Questions ### Why is my electric water heater not heating at all? A tripped breaker, high‑limit reset, failed upper element, or bad thermostat can stop heating. Reset the breaker and high‑limit once. If it trips again, schedule service for safe testing and part replacement. ### Why does my gas water heater have a lit pilot but no hot water? If the burner will not fire, the thermocouple or flame sensor may not signal flame, or the gas control valve may have failed. A licensed tech should test sensors and gas pressure, then relight or replace parts. ### How often should I flush my water heater? At least once a year. Flushing removes sediment that insulates heat and causes noise. Our $59 flush and inspection restores performance and includes a full safety checklist. ### What temperature should my water heater be set to? Most homes are best at 120 to 125°F. This balances comfort, safety, and efficiency while limiting scald risk and scale buildup. ### When is replacement better than repair? Consider replacement if the tank is 8 to 12 years old, leaking, or needs a costly major part. Upgrading to tankless can provide on‑demand hot water, space savings, and energy efficiency. ## Takeaway If your water heater is not heating, start with safe checks to power, fuel, settings, and sediment. For anything involving gas, wiring, or repeated failures, bring in a pro. In Crown Point and across Northwest Indiana, Summers restores hot water fast with upfront pricing and a 100 percent satisfaction guarantee. ## Ready for Hot Water Today? Call Summers Plumbing Heating & Cooling at (219) 500-8867 or book at https://www.summersphc.com/crown-point/. Mention the $59 inspection or $500 off tankless installation if you qualify. Same‑day service in Crown Point, Hammond, Merrillville, Schererville, East Chicago, Highland, Munster, Saint John, and Dyer. ## About Summers Plumbing Heating & Cooling Since 1969, Summers Plumbing Heating & Cooling has served Northwest Indiana with licensed, background‑checked technicians and fully stocked trucks. We are BBB accredited and offer upfront pricing, free second opinions, and a satisfaction guarantee. We install and service leading brands like Rinnai and Bradford White, with 24/7 emergency response and flexible financing. Count on our local team for fast diagnostics, code‑compliant installs, and long‑term reliability.

Water Heater Services in Northwest Indiana

Need reliable water heater help now? We install, repair, and maintain water heaters with clear, upfront pricing and same-day service when possible. Serving Northwest Indiana, including Gary, Hammond, and Crown Point. Our licensed, background-checked technicians back their work, and our company holds a 4.8 rating from 4,711 reviews. As temperatures swing heading into summer, a quick flush and safety check can prevent surprise failures. Call or book online for friendly service today.

Call (219) 500-8867

Price intelligence

How our prices compare.

rate us fair value or better100%

What can you expect to pay?

Customer Perception

How customers feel about the bill, in their words.

Post-job survey · verified customers

SentimentSummers Plumbing Heating & CoolingMarket avgDelta

Reasonable Price100%72%+28 pts

Price Factors

Typical price ranges.

Price ranges for this service based on Summers Plumbing Heating & Cooling job history.

Replace/Install

Our price$2,500 – $8,000

Typical$1,000 – $3,200

Repair

Our price$200 – $800

Typical$101 – $2,000

Maintain

Our price$59 – $400

Typical$51 – $550

Our work

Project Gallery

Experience reliability and precision with Summers Plumbing Heating & Cooling as we ensure your home services are top-notch.

For all your water heater and electrical needs, trust the expert care of Summers Plumbing Heating & Cooling.

At Summers Plumbing Heating & Cooling, our skilled technicians ensure your water heaters are in perfect working condition with professional care.

Efficient and professional, Summers Plumbing Heating & Cooling ensures your home systems are in top shape.

Current Offers6 Active

Active coupons & redemption details.

View all offers

Water Heater

have your water heater inspected for only $59

Call us today at (219) 797-6150 or schedule a service through our website.